Introduction of portable water jet machine
Waterjet pump generates high pressure water. Abrasive garnet is mixed in this high pressure water and passed to a cuting torch.
The mixture shoots out from a nozzle at the end of the torch and hits the material to make cuts.
An example of portable waterjet connection
Ordering information
A complete set of machine includes a pump, an abrasive tank
and one or more of the following cutting tools. Water tank and water pressure boost pump are optional.
The standard pump is driven by electric motor. Optionally it can be driven by a diesel engine. The cutting
tools, except the handheld wand, are normally driven by a 24VDC motor. Alternatively, the tools can be
driven by a hydraulic motor if explosion proof is strictly required.
Types of portable track tools, and several CNC controlled tools.
There are 4 types of portable cutting tools for waterjet cutting.
1. Pipe cutting rail -- Model M1
This portable waterjet can cut pipes with diameter range 20-400 cm.
2. Llinear cutting rail -- Model M2
The standard length of the linear tool is 1.5m. Custom length can be ordered. Magnet is often used to attach
the linear rail to the object for cutting, for example, the wall of a tank.
3. Circle hole cutting tool-- Model M3
The diameter range is from 10cm to 100cm.
4. Handheld cutting wand -- Model M4
Handheld wand is used for hard to reach jobs. Operator has to hold it steady and move in slow speed. Wearing safety
protection is must. the examples below are cutting a block of concrete, and cutting a rust lock bolt.
5. There are a number of CNC controlled portable water jet cutting tools
With the help of CNC, this rail can cut the pipes for various shapes, usually for branch connection, such as saddle,
and miter shapes.
|
